MinarcMig Adaptive 180 Manuel de service télécharger pdf (Page 5)

1. PREFACE

1.1 GENERAL

Congratulations on choosing the MinarcMig equipment. Used correctly,

Kemppi products can signicantly increase the productivity of your welding,

and provide years of economical service.

This operating manual contains important information on the use,

maintenance and safety of your Kemppi product. The technical specications

of the equipment can be found at the end of the manual.

Please read the manual carefully before using the equipment for the rst

time. For your own safety and that of your working environment, pay

particular attention to the safety instructions in the manual.

For more information on Kemppi products, contact Kemppi Oy, consult an

authorised Kemppi dealer, or visit the Kemppi web site at www.kemppi.com.

The specications presented in this manual are subject to change without

prior notice.

Important notes

Items in the manual that require particular attention in order to minimise

damage and personal harm are indicated with the ’NOTE!’ notation. Read

these sections carefully and follow their instructions.

1.2 PROPERTIES

MinarcMig Adaptive 180 is an easy-to-use MIG welding machine suitable

for both hobby and professional use. The welding machine is small, ecient

and extremely light. It is easy to carry with the help of a shoulder strap. The

machine is suitable for a range of dierent purposes and the possibility to

use a long extention cord eases operation in various sites. It is also suitable

for generator use on construction sites.

The machine has both an automatic and manul mode. In the automatic

mode, you must rst select the ller wire material after which the welding

voltage and wire feed speed can be adjusted with one control according

to the thickness of the welded sheet. Thus, selecting the right parameters is

easy. In automatic mode, the length of the arc, or welding heat, is trimmed

with another control. In manual mode, the welding voltage and wire feed

speed are adjusted separately with their own controls. The use of the

machine is aided with a display which also displays the welding current,

welding voltage and wire feed speed.

1 2 3 4 5 6 7 8 9 10 ... 25 26

Pas de commentaire

MinarcMig Adaptive 180 Manuel de service Page 5